Doç. Dr. ABDULLAH EKİNCİ

1. Tracking progress and interlinkages in SDG achievement: A monitoring index approach with insights from Jordan

Ekinci A.

ENVIRONMENTAL AND SUSTAINABILITY INDICATORS , cilt.28, sa.100882, ss.0-1, 2025 (ESCI, Scopus)

2. Sustainable strength enhancement of cement-clay composites through partial replacement with sewage sludge and sewage sludge ash

Haroon M. U., EKİNCİ A., Balkis A. P.

Construction and Building Materials , cilt.489, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

3. Physical Model for Sintered Gypsum—Clay End-Bearing Piles in Sand

Selcukhan O., EKİNCİ A., Assadi-Langroudi A.

International Journal of Civil Engineering , cilt.23, sa.8, ss.1653-1668, 2025 (SCI-Expanded, Scopus)

4. Utilization of Artificially Cemented Sand for Porous Pavement Applications and Analysis of Runoff Control

Ekinci A.

CONSTRUCTION AND BUILDING MATERIALS , cilt.489, sa.142330, ss.0-1, 2025 (SCI-Expanded, Scopus)

5. Evaluating the strength, durability and porosity characteristics of alluvial clay stabilized with marble dust as a sustainable binder

Hanafi M., Javed I., EKİNCİ A.

Results in Engineering , cilt.25, 2025 (ESCI, Scopus)

6. Optimising sewage sludge and sewage sludge ash utilisation in cement stabilised clay through durability, strength and microstructural Evaluation

Haroon M. U., Saeed H., Ekinci A.

Geomechanics and Geoengineering , 2025 (ESCI, Scopus)

7. Enhancing Clay Soil’s Geotechnical Properties Utilizing Sintered Gypsum and Glass Powder

Nategh M., Ekinci A., Iravanian A., Fahrioğlu M.

Applied Sciences , cilt.14, ss.1-19, 2024 (Scopus)

8. Novel Porosity-Water/Binder Index for Strength Prediction of Artificially Cemented Soils

Arrieta Baldovino J. D. J., EKİNCİ A., Bruschi G. J.

Journal of Materials in Civil Engineering , cilt.36, sa.2, 2024 (SCI-Expanded, Scopus)

9. Effect of glass fibre on the strength and durability of artificially cemented alluvial clay

EKİNCİ A., Arrieta Baldovino J., Aydın E., Hanafi M.

International Journal of Geotechnical Engineering , cilt.18, sa.3, ss.275-290, 2024 (ESCI, Scopus)

10. Evaluation of Mechanical and Microstructural Properties of Waste Tire Improved Cemented Clay

Al-Subari L., EKİNCİ A.

Journal of Natural Fibers , cilt.21, sa.1, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

11. Life cycle assessment of soil stabilization using cement and waste additives

Al-Subari B. L., Hilal A., EKİNCİ A.

Construction and Building Materials , cilt.403, 2023 (SCI-Expanded, Scopus)

12. Assessment of Liquefaction Hazard and Mapping Based on Standard Penetration Tests in the Long Beach and Tuzla Regions of Cyprus

Selcukhan O., Ekinci A.

INFRASTRUCTURES (BASEL) , cilt.8, sa.6, ss.1-19, 2023 (ESCI, Scopus)

13. Strength, durability, and microstructure of lime production residue glass powder binder-based geomaterial

de Jesus Arrieta Baldovino J., dos Santos Izzo R. L., EKİNCİ A.

ACTA GEOTECHNICA , cilt.18, sa.3, ss.1593-1606, 2023 (SCI-Expanded, Scopus)

14. Mechanical properties of alluvium clay treated with cement and carbon fiber: relationships among strength, stiffness, and durability

Hanafi M., Abki A., EKİNCİ A., Arrieta Baldovino J. d. J.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING , cilt.24, sa.1, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

15. Engineering and Microstructural Properties of Alluvium Clay Stabilized with Portland Cement and Coal Bottom Ash for Sustainable Future

Hanafi M., EKİNCİ A., Aydin E.

KSCE JOURNAL OF CIVIL ENGINEERING , cilt.26, sa.12, ss.5049-5066, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

16. Strength Relationship Equation for Artificially Stabilized Rammed Sedimentary Soils

Baldovino J. A., Izzo R., EKİNCİ A.

BUILDINGS , cilt.12, sa.9, 2022 (SCI-Expanded, SSCI, Scopus)

17. Strength and durability assessment of shredded tire rubber stabilized artificially cemented alluvial clay

Al-Subari L., EKİNCİ A.

CONSTRUCTION AND BUILDING MATERIALS , cilt.345, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

18. Environmental and economical assessment of earth-retaining walls for design optimization

Al-Subari L., Yaqubi N. A., Selcukhan O., EKİNCİ A.

ENVIRONMENTAL GEOTECHNICS , cilt.11, sa.5, ss.366-383, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

19. Copper slag-hydrated lime-Portland cement stabilised marine-deposited clay

EKİNCİ A., Scheuermann Filho H. C., Consoli N. C.

PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-GROUND IMPROVEMENT , cilt.175, sa.1, ss.51-63, 2022 (ESCI, Scopus)

20. Parameters Controlling Strength, Stiffness and Durability of a Fibre-Reinforced Clay

EKİNCİ A., Abki A., Mirzababaei M.

INTERNATIONAL JOURNAL OF GEOSYNTHETICS AND GROUND ENGINEERING , cilt.8, sa.1, 2022 (ESCI, Scopus)

21. The mechanical behaviour of compacted Lambeth-group clays with and without fibre reinforcement

EKİNCİ A., Ferreira P. M. V., Rezaeian M.

GEOTEXTILES AND GEOMEMBRANES , cilt.50, sa.1, ss.1-19, 2022 (SCI-Expanded, Scopus)

22. Recent Advances in Nature-Inspired Solutions for Ground Engineering (NiSE)

Assadi-Langroudi A., O'Kelly B. C., Barreto D., Cotecchia F., Dicks H., EKİNCİ A., et al.

INTERNATIONAL JOURNAL OF GEOSYNTHETICS AND GROUND ENGINEERING , cilt.8, sa.1, 2022 (ESCI)

23. The utilization of waste rubber tire powder to improve the mechanical properties of cement-clay composites

Al-Subari L., EKİNCİ A., Aydin E.

CONSTRUCTION AND BUILDING MATERIALS , cilt.300, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

24. Effect of cyclic shearing on contact surfaces of geo-materials under constant normal force

Ferreira P., Muturi T., EKİNCİ A.

Arabian Journal of Geosciences , cilt.14, sa.18, 2021 (SCI-Expanded, Scopus)

25. Aerial Close-Range Photogrammetry to Quantify Deformations of the Pile Retaining Walls

EKİNCİ A., Muturi T., Ferreira P. M. V.

JOURNAL OF THE INDIAN SOCIETY OF REMOTE SENSING , cilt.49, sa.5, ss.1051-1066, 2021 (SCI-Expanded, Scopus)

26. Determination of Initial-Shear-Stress Impact on Ramsar-Sand Liquefaction Susceptibility through Monotonic Triaxial Testing

Nategh M., EKİNCİ A., Iravanian A., Salamatpoor S.

APPLIED SCIENCES-BASEL , cilt.10, sa.21, 2020 (SCI-Expanded, Scopus)